Pinball Collection – 1968 Williams Smarty

1968 Williams Smarty

This is the first blog entry in my Pinball Collection series of posts. In these blog entries, I describe one of the pinball machines in my collection, along with a small back story including how I had acquired the machine and its history while in my possession.


For the longest time, I have been an arcade game aficionado, mostly involving the stand-up type of video games. It wasn’t until much later in life that I developed an appreciation for pinball machines. Sure, I grew up with them, but video games were a primary attraction for me.

In the year when I bought my house, I learned that the local fairground hosted an annual pinball show called The York Show. Having an empty basement suitable for a gameroom, I attended the show for the first time to see what it was all about. Basically, for one admission price, you can play free pinball all day out of the hundred or so which were brought in by volunteers. But on that first year, I did not pay the regular admission to get into the event. I only walked around the outside “tailgating” vendors, which I could do free of charge. I wanted a pinball machine, but I didn’t want to invest a lot of money in one. One of the vendors has a 1968 Williams Smarty, untested, for only $100. I bought it and dragged it home!The first thing I did was set it up in the garage and ignored the first rule about testing “untested” electrical equipment. I simply plugged it in and flicked the switch!! The machine lit up completely and kept making a Ka-chug, Ka-chug, Ka-chug… sound. I then turned it off, thankful that I only heard repetitive noises and not explosions and flames, and proceeded to open up the cabinet and playfield to look at the miles of wiring and groups of relays. This pinball machine is an EM type, or Electro-Mechanical. Everything is operated through relays, wire, and mechanical switching components. There is no CPU inside.

I was lucky. This pinball machine came with the schematic, which is ALWAYS a useful thing to have. After familiarizing myself with the schematic diagram, I eventually went through and cleaned the relays and checked the wires. It was a time consuming effort, but it DID pay off. I got the machine running smoothly!

After playing what seemed like a hundred games on it while it was still in my garage, I eventually transferred it to my basement gameroom and found a perfect place for it (under a well lit area, LOL). The family enjoyed playing it and I enjoyed the satisfaction of being able to get it working again. Twenty five years before, I used to work in a regional repair center, fixing video games and pinball machines (a DREAM JOB at the time!!!). I’m glad some of the repair knowledge I had back then still remained after all these years.

Over the next year, the pinball machine was a centerpiece to my gameroom. I had to do a few minor repairs on occasion, but that is a basic responsibility to pinball machine ownership. I also did my best to make sure and keep it clean. Unfortunately, the silkscreened paint behind the backglass is in bad shape and is flaking away, but that’s how it was when I bought it. I just have been unable to find a replacement backglass for it.

The Smarty game play goes as follows… It is a two-flipper game, but with the smaller style flippers (before the more common modern flipper size took over). The object of the game is to hit various targets and rollovers to light up letters in a grid on the playfield. The grid is a 4×4 matrix of letters, spelled out in four letter words (NOT the kind of four letter words you yell when the ball goes down the chute!!). As you complete each word, certain bonuses are activated which either give you more points, or scores an “extra ball.”

This pinball machine does not score “freeplays.” It was built in an era where pinball machines were considered gambling devices in some jurisdictions. There is a version of this game which does score freeplays. It’s called “Ding Dong”, and it completely identical to Smarty, except for the name. What this machine gives you is an extra ball as a bonus.

In the grand scheme of things, this isn’t a particularly “fast action” pinball machine. Don’t get me wrong. The gameplay is fun. However, it holds more sentimental value to me being the first one I owned (and fixed) for use in a gameroom.

 

28 Comments to "Pinball Collection – 1968 Williams Smarty"

  1. Dan says:

    my friend has this identical machine (i think) it shows kids on the lite up backboard this machine has a like new glass backboard model number: 60618
    this machine needs the rubber bumper pieces…however is fully operational.

    • jeff says:

      Just this past weekend, I was able to pick up a replacement backglass… attached to a non-working Smarty pinball machine. It’s not in perfect condition, but it looks 1000% better in my opinion! I’ll be writing an update post soon, showing the difference between the two.

  2. Rich says:

    Reburbishing a williams ding dong. Any way you can email me a copy of the schematics?
    Thanks

  3. PinballRefurb says:

    Jeff
    I think this will post. Had troubles.
    If you can scan them in I would greatly appreciate it. I am refurbishing one component at at time. Just to make sure I can get it up and running. It is very time consuming.
    The schematics would help alot.
    Rich

    • Rich says:

      Jeff
      Would you be able to scan them in PDF format?

      • jeff says:

        I should be able to. The scanning resource I’ll be using defaults to PDF, I believe

        • Rich says:

          Thanks,

        • Rich says:

          Any time?

          Thanks

          • jeff says:

            So sorry for the delay. I just tried to scan the schematic in my personal scanner and it’s difficult to fold/manipulate the various sections of the large printed media.

            So I don’t forget (again), I have put the schematic in my work backpack and set myself a reminder on my Android phone. So come Monday morning, I will be at work with the schematic, and a fresh reminder, and direct access to a larger format scanner.

            I will get this scanned! If not to follow through with my offer, but to have an electronic version for myself for use on my tablet computer.

  4. Mike M says:

    My brother and I both love Ding Dong and would each love to own one.

  5. Rich says:

    Jeff,
    Thanks

  6. Brandon says:

    I have a 1968 Ding Dong Pin ball machine for sale. It was working a few months ago. But, just quit. All the components are there. I really don’t know what it is worth in this condition. The play field is new. With new rubbers etc. Glass is all good. Can anyone tell me what it might be worth?

    • jeff says:

      I found that most EM (electromechanical) pinball machines like that one may be worth several hundred dollars ($200-$00) for its parts alone. But that’s if the right buyer comes along that can use those parts.

      But first, you should check out basic electrical issues. If you can get it working, the value increases by $100 or $200.

      If it completely quit (no lights or anything), check the fuses, located near the coinbox area. You might need to lift the playfield first for easier access.

      If only parts or sections work (lights but no action, action but no lights, etc.) you might want to pull and replace some of the junction connectors that go between sections, like the two that are in the back of the top box. Sometimes, those older EM machines get oxidation on those electrical connections and cause failure.

  7. Ron says:

    Any suggestions on how to get rid of pinball wear grooves at the top of my Smarty by Williams machine?

    • jeff says:

      Are you referring to the arc wear lines leading out from the launch chute? If so, surface dirt might clean away using products like Novus 1 and Novus 2, which are formulated for cleaning dirt from pinball playfields.

      If it’s scored and grooved paint, then perhaps hand painting could replace the worn paint.

      I have similar wear on mine, but I leave it alone as “character traits.”

      • Ron says:

        Thank you for the input I really appreciate it. I hear you about the Character traits but the ball seams to follow the worn line too much and drops the ball in the same spots all the time.

  8. Melanie Plum says:

    Were any Williams Ding Dong machines made before 1968? I have a working one sitting in my game room that we want to get rid of, complete with all paperwork and schematic, but I swear the paperwork in it says 1965 or 66 but I can’t find that there were any made before 1968. Is this possible?

Leave a Reply to Dan Cancel reply

Your email address will not be published. Required fields are marked *

The way ELECTRONICS used to be!

css.php